GX | Tandem Dual Dump

CONFIGURATIONS SUMMARY

• G.V.W.R. 22,000 Lbs
• G.A.W.R. 12,000 Lbs/Axle
• LENGTH 16′ – 22′
• WIDTH 102″
• DUMP ANGLE 40°
• HYDRAULICS Power Up/Power Down
• DUMP SIDES 48″
• LOAD CAPACITY 12,440 – 13,740 Lbs
• BED CAPACITY 10.07– 27.70 yd³
• COUPLER Gooseneck
• AXLES (2) 10,000 Lb
• EST. WEIGHT 8,260 – 9,560 Lbs

GX22 | STANDARD FEATURES

G.V.W.R.	22,000 lbs
G.A.W.R.	10,000 lbs / Axle
NECK	12” I-Beam
FRAME	12” I-Beam
CROSSMEMBERS	10″ I-Beam
BED FRAME	2″ x 5″ Tubing
BED CROSSMEMBERS	3″ Channel
AXLES	(2) 10,000 lb Dexter 2 Electric NEV-R-ADJUST Brake
SUSPENSION	Dexter Heavy-Duty Suspension System (HDSS)
COUPLER	2-5/16″ Adjustable Round Gooseneck
JACK	(2) 10,000 lb Drop-Leg
WHEELS	16” 8-Hole Wheels
TIRES	ST235/80 R16 LRE
SIDES	48″ High, 10 Gauge Removable
FLOOR	10 Gauge Smooth Plate
STORAGE	Full-width Front Toolbox

SPARE	Fold-down Spare Tire Mount (spare included)
RAMPS	96″ x 16″‘ Rear Slide-In Ramps
GATE	2-Way Spreader Gate
PUMP	12v Dual Acting Hydraulic Pump w/Manual Gravity Down Valve
CONTROLLER	2-Button w/12′ Control Cable
BATTERY	12v Battery w/5amp Trickle Charger
CYLINDER	6″ x 29″ x 2-3/4″ Cylinder w/Scissor Hoist
STEP	15″ MAX-Step
D-RINGS	(4) 3″ Weld-on D-rings
LIGHTS	LED Stop, Tail, & Clearance Lights
WIRING	16 Ga. 5-Way Double-Insulated Wire Harness
PLUG	7-way Cold Weather Cord
SAFETY CHAINS	(2) 3/8″ Grade 70
PRETREATMENT	Mechanical and/or Chemical Pretreatment for Maximum Paint Adhesion
FINISH	(Black) Sherwin-Williams Powdura OneCure, Primer w/Polyester TGIC Gloss Powder Topcoat

CONFIGURATIONS SUMMARY

• G.V.W.R. 24,000 Lbs
• G.A.W.R. 12,000 Lbs/Axle
• LENGTH 16′ – 22′
• WIDTH 102″
• DUMP ANGLE 40°
• HYDRAULICS Power Up/Power Down
• DUMP SIDES 48″
• LOAD CAPACITY 14,440 – 15,740 Lbs
• BED CAPACITY 10.07– 27.70 yd³
• COUPLER Gooseneck
• AXLES (2) 12,000 Lb
• EST. WEIGHT 8,260 – 9,560 Lbs

GX24 | STANDARD FEATURES

G.V.W.R.	24,000 lbs
G.A.W.R.	12,000 lbs / Axle
NECK	12” I-Beam
FRAME	12” I-Beam
CROSSMEMBERS	10″ I-Beam
BED FRAME	2″ x 5″ Tubing
BED CROSSMEMBERS	3″ Channel
AXLES	(2) 12,000 lb Dexter 2 Electric NEV-R-ADJUST Brake
SUSPENSION	Dexter Heavy-Duty Suspension System (HDSS)
COUPLER	2-5/16″ Adjustable Round Gooseneck
JACK	(2) 10,000 lb Drop-Leg
WHEELS	16” 8-Hole Wheels
TIRES	ST235/80 R16 LRE
SIDES	48″ High, 10 Gauge Removable
FLOOR	10 Gauge Smooth Plate
STORAGE	Full-width Front Toolbox

SPARE	Fold-down Spare Tire Mount (spare included)
RAMPS	96″ x 16″‘ Rear Slide-In Ramps
GATE	2-Way Spreader Gate
PUMP	12v Dual Acting Hydraulic Pump w/Manual Gravity Down Valve
CONTROLLER	2-Button w/12′ Control Cable
BATTERY	12v Battery w/5amp Trickle Charger
CYLINDER	6″ x 29″ x 2-3/4″ Cylinder w/Scissor Hoist
STEP	15″ MAX-Step
D-RINGS	(4) 3″ Weld-on D-rings
LIGHTS	LED Stop, Tail, & Clearance Lights
WIRING	16 Ga. 5-Way Double-Insulated Wire Harness
PLUG	7-way Cold Weather Cord
SAFETY CHAINS	(2) 3/8″ Grade 70
PRETREATMENT	Mechanical and/or Chemical Pretreatment for Maximum Paint Adhesion
FINISH	(Black) Sherwin-Williams Powdura OneCure, Primer w/Polyester TGIC Gloss Powder Topcoat

CONFIGURATIONS SUMMARY

• G.V.W.R. 30,000 Lbs
• G.A.W.R. 15,000 Lbs/Axle
• LENGTH 16′ – 22′
• WIDTH 102″
• DUMP ANGLE 40°
• HYDRAULICS Power Up/Power Down
• DUMP SIDES 48″
• LOAD CAPACITY 20,180 – 21,480 Lbs
• BED CAPACITY 10.07– 27.70 yd³
• COUPLER Gooseneck
• AXLES (2) 15,000 Lb
• EST. WEIGHT 8,520 – 9,820 Lbs

GX30 | STANDARD FEATURES

G.V.W.R.30,000 lbsG.A.W.R.15,000 lbs / AxleNECK12” I-BeamFRAME12” I-BeamCROSSMEMBERS10″ I-BeamBED FRAME2″ x 5″ TubingBED CROSSMEMBERS3″ ChannelAXLES(2) 15,000 lb Dexter 2 Electric NEV-R-ADJUST BrakeSUSPENSIONDexter Heavy-Duty Suspension System (HDSS)COUPLER2-5/16″ Adjustable Round GooseneckJACK(2) 10,000 lb Drop-LegWHEELS17.5” 8-Hole WheelsTIRESST215/75 R17.5 LRHSIDES48″ High, 10 Gauge RemovableFLOOR10 Gauge Smooth PlateSTORAGEFull-width Front Toolbox

SPARE	Fold-down Spare Tire Mount (spare included)
RAMPS	96″ x 16″‘ Rear Slide-In Ramps
GATE	2-Way Spreader Gate
PUMP	12v Dual Acting Hydraulic Pump w/Manual Gravity Down Valve
CONTROLLER	2-Button w/12′ Control Cable
BATTERY	12v Battery w/5amp Trickle Charger
CYLINDER	6″ x 29″ x 2-3/4″ Cylinder w/Scissor Hoist
STEP	15″ MAX-Step
D-RINGS	(4) 3″ Weld-on D-rings
LIGHTS	LED Stop, Tail, & Clearance Lights
WIRING	16 Ga. 5-Way Double-Insulated Wire Harness
PLUG	7-way Cold Weather Cord
SAFETY CHAINS	(2) 1/2″ Grade 80
PRETREATMENT	Mechanical and/or Chemical Pretreatment for Maximum Paint Adhesion
FINISH	(Black) Sherwin-Williams Powdura OneCure, Primer w/Polyester TGIC Gloss Powder Topcoat