CONFIGURATIONS SUMMARY
- G.V.W.R. 20,000 Lbs
- G.A.W.R. 10,000 Lbs/Axle
- LENGTH 16′ – 20′
- WIDTH 83″
- DUMP ANGLE 45°
- HYDRAULICS Power Up/Power Down
- DUMP SIDES 24″
- LOAD CAPACITY 12,410 – 12,950 Lbs
- BED CAPACITY 8.20 – 10.25 yd³
- COUPLER Pintle
- AXLES (2) 10,000 Lb TORSION
- EST. WEIGHT
- 7,050 – 7,590 Lbs
DH20 | STANDARD FEATURES
| G.V.W.R. | 20,000 lbs |
|---|---|
| G.A.W.R. | 10,000 lbs / Axle |
| TONGUE | 12” I-Beam |
| FRAME | 12” I-Beam |
| CROSSMEMBERS | 2″ x 5″ Tubing |
| BED FRAME | 2″ x 5″ Tubing |
| BED CROSSMEMBERS | 3″ Channel |
| AXLES | (2) 10,000 lb Dexter Torsion, 2 Electric NEV-R-ADJUST Brake |
| SUSPENSION | Torsion |
| COUPLER | 3″ Pintle |
| JACK | (2) 10,000 lb Drop-Leg |
| WHEELS | 17.5” 8-Hole Wheels |
| TIRES | ST215/75 R17.5 LRH |
| SIDES | 24″ High, 10 Gauge w/MAX-Rail |
| FLOOR | 7 Gauge Smooth Plate |
| STORAGE | Tongue-mount 2-Tier MAX-Storage Toolbox |
| FENDERS | Steel Diamond Plate |
|---|---|
| RAMPS | 96″ x 16″ Rear Slide-In Ramps |
| GATE | 2-Way Spreader Gate |
| PUMP | 12v Dual Acting Hydraulic Pump w/Manual Gravity Down Valve |
| CONTROLLER | 2-Button w/12′ Control Cable |
| BATTERY | 12v Battery w/5amp Trickle Charger |
| CYLINDER | 6″ x 29″ x 2-3/4″ Cylinder w/Scissor Hoist |
| TARP | E-Z Lock Mesh Tarp System w/Cover |
| D-RINGS | (4) 3″ Weld-on D-rings |
| LIGHTS | LED Stop, Tail, & Clearance Lights |
| WIRING | 16 Ga. 5-Way Double-Insulated Wire Harness |
| PLUG | 7-way Cold Weather Cord |
| SAFETY CHAINS | (2) 3/8″ Grade 70 |
| PRETREATMENT | Mechanical and/or Chemical Pretreatment for Maximum Paint Adhesion |
| FINISH | (Black) Sherwin-Williams Powdura OneCure, Primer w/Polyester TGIC Gloss Powder Topcoat |
Reviews
There are no reviews yet.