CONFIGURATIONS SUMMARY
- G.V.W.R. 2,995 Lbs
- G.A.W.R. 3,500 Lbs/Axle
- LENGTH 8′
- WIDTH 60″
- DUMP ANGLE 40
- HYDRAULICS Power Up/Gravity Down
- DUMP SIDES 12″ H
- LOAD CAPACITY 2,123 Lbs
- BED CAPACITY 1.48 yd³
- COUPLER Bumper Pull
- AXLES (1) 3,500 Lb
- EST. WEIGHT 872 Lbs
DU03 | STANDARD FEATURES
| G.V.W.R. | 3,500 lbs |
|---|---|
| G.A.W.R. | 3,500 lbs / Axle |
| TONGUE | 2″ x 2″ x 3/16″ Sq. Tubing |
| FRAME | 3/16″ Plate |
| CROSSMEMBERS | 2″ x 4″ x 1/8″ Tubing |
| BED FRAME | 2″ x 2″ Tubing |
| BED CROSSMEMBERS | 2″ x 2″ x 3/16″ Tubing |
| AXLES | (1) 3,500 lb Dexter Idler |
| SUSPENSION | Multi-Leaf Spring |
| COUPLER | 2” Straight Tube |
| JACK | (1) 5,000 lb Top-wind Swivel |
| WHEELS | 10” 5-Hole Wheels |
| TIRES | ST205/65 R10 LRC |
| SIDES | 12″ High, 14 Gauge |
| RAMPS | 58”x 12” Front/Rear Mount Ramps |
|---|---|
| FLOOR | 14 Gauge Smooth Plate |
| STORAGE | Tongue-mount Toolbox (hyd. storage) |
| PUMP | 12v Dual Acting Hydraulic Pump w/Manual Gravity Down Valve |
| CYLINDER | 1-7/8″ x 12″ x 1″ |
| BATTERY | 12v Battery w/5amp Trickle Charger |
| D-RINGS | (4) 3″ Weld-on D-rings |
| LIGHTS | LED Stop, Tail, & Clearance Lights |
| WIRING | 16 Ga. 5-Way Double-Insulated Wire Harness |
| PLUG | 4-way Cold Weather Cord |
| SAFETY CHAINS | (2) 1/4″ Grade 30 |
| PRETREATMENT | Mechanical and/or Chemical Pretreatment for Maximum Paint Adhesion |
| FINISH | (Black) Sherwin-Williams Powdura OneCure, Primer w/Polyester TGIC Gloss Powder Topcoat |
Reviews
There are no reviews yet.